NAME: Valkyrie
MODEL: Bolt 37, Hull # 5
TYPE: Racer
DESIGNER: Ker Yacht Design
BUILDER: CSC Composites
LOA: 36' 1"
BEAM: 11' 5"
DISPL: 7,791 lbs.
RIG: Sloop - fractional
BOTTOM PAINT: Proline #1088 Antifouling with carbon (black)

LWL: 33' 3"
DRAFT: 8' 6"
BALLAST: 4,365 lbs.
ENGINE: Yanmar 22 HP Diesel
PROPELLER: 2 bladed folding

Multi and unidirectional glass, Vinylester resin and PVC foam over female tooling using vacuum assisted infusion for accurate resin/fiber ratio and low air voids.

Designed to meet ORC, IMS, IRC regulations.
Basic Galley with plumbed sink, manual water pump and location for installing a single burner stove.
Navigation area
Engine box with removable portion to allow access to service engine

Cabin lighting under coach roof, galley and nav areas.
12 volt DC switch panel and battery indicator mounted on the engine box.
Battery isolator/selection switch mounted on the engine box.
Gel type batteries for engine start and service
Rev counter and start stop switches on the engine box.
Navigation LED lights at masthead

B&G H3000 Club Race Pack with 5 20/20 displays (carbon mast bracket with 4 displays and 1 bulkhead display)
Zeus TOUCH T1 Display
Standard Horizon VHF GX1700
Emtrak AIS transceiver
Carbon masthead bracket

2:1 Mainsheet system on Harken blocks, lead direct from the end of the track to mainsheet winches.
Harken adjustable mainsheet traveler with a 6:1 cascade purchase below deck and lead trimmers foot rest
Twin transverse jib tracks with ball-bearing car system
In-hauler system, 6:1 lead to cockpit
Up/Down system, 4:1 cascade with a 6:1 tail purchase (24:1 total) and fitted with a floating ring
Harken override fairleads
Harken spinnaker sheet and diverter blocks
Harken Halyard Blocks
Spinlock Jammers for main, masthead spin, fractional spin and jib halyards, and tack line
Solid vang with tail lead below deck 32:1 cascade purchase exiting cockpit sole close to main traveler
Foredeck slide opening hatch with round edges
Double s/s rail pulpit and pushpit, 8 s/s stanchions, s/s Lifelines
Foot chocks for helmsman, main trimmer

Two (2) Harken # 46 Quattro primary winches (2015 upgrade).
One (1) Harken # 35.2STA winch in the pit
Two (2) Harken # 40.2PTA mainsheet winches
Two (2) Harken # 35.2PTA runner winches
Harken lock-in winch handles

Prepreg carbon fiber rudder stock and blade, vacuum bagged and cured at high temperature.
Composite Tiller
Self-aligning roller rudder bearings

SAE 4340 cast steel fin with CNC molded composite skins
Lead bulb, cast from CNC milled plug, painted and faired with templates.
Super-duplex stainless steel studs
Keel Bulb Redesign (2015): reduced by 350 kg, engineered by Nelson-Marek and performed by Brad Fitzgerald. Displacement and Ballast listed herein include this reduction
Integrated, sealed kelp cutter (2015)

Hall Spars High Modulus carbon mast with two swept spreaders
Nitronic 50 Rod standing rigging.
Deep carbon race boom
Internal mast jack
Aramid backstays

P: 50’ 2”
I: 48’ 9”
J: 14’ 2”
E: 15’ 7”
SPL: 19’ 1”
SPA: 1560 ft2


2:1 mainsail halyard, 1 fractional headsail halyard, 1 fractional halyard and 2 masthead spinnaker halyards
Mast deck collar with custom moulded resin wedge, adjustable mast step
2 Spectra spinnaker sheets with Tylaska snapshackels
2 Spectra jib sheets with soft shackles
2 Spectra spinnaker tack line with Tylaska snapshackels
Spectra mainsheet
Mainsail and Genoa traveler lines
Outhaul lines
Cuningham lines
Spinnaker string drop system (2015)
All new running rigging, sheets and control lines (2016)

2016 North 3Di Main (used one regatta)
2016 North 3Di J1 Jib Light/Medium (used one regatta)
2016 North 3Di J2 Jib Medium/Heavy (used one regatta)
2016 North A1 Spinnaker (used one regatta)
2016 North A2 Spinnaker (used one regatta)
2016 North Spinnaker Staysail on furler (used one regatta)
2016 North Genoa Staysail (used one regatta)
2015 North A0 CZ on furler
2015 North A3 Spinnaker
2015 North 3Di #3 Jib
2015 North 3Di Main
2015 North 3Di J1 Light/Medium
2015 North 3Di J2 Medium/Heavy
2015 North A1 Spinnaker
2015 North A2 Spinnaker

Raptor cockpit decking (2016)
US Coast Guard Safety Equipment
Fenders and dock lines
Line bags
Canvas: main/boom cover; winch covers
Spares, including EquipLite snatch blocks
Other safety gear available as option

2016 Winner Overall Corrected Newport-Ensenada International Yacht Race
2016 Winner Long Beach Race Week

Owned by a Delaware LLC which can be transferred to buyer

Launched in 2015, Valkyrie is in excellent condition and ready to race.

Stagg Yachts, Inc. offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated.

CONTACT: Stagg Yachts, Inc.
PRICE: $175,000